Corbels for granite countertops – Granite worktops are cut from slabs that allow stone easy support a traditional cabinet hanging of two to four inches. A kitchen cabinet often requires a larger kitchen table overhang of 12 to 16 inches or more on one side for a bar or seating. There is a simple method that will provide the necessary in an attractive way to complement the cabinets and kitchen table support.
Layout corbels for granite countertops locations in the outskirts-side of the island cabinet. For example, for an island support 48-inch kitchen table width. Then with a four-inch edge outline and 16 inches on the supported end. And four 12-inch corbels will spread about 16 inches apart cabinet style and provide support for the kitchen table overhang. Plumb corbel center lines down outside and inside the walls of the island cabinet using a plan.
7 Photos Gallery of: Installing Corbels For Granite Countertops
Drill the pilot holes to the corbels for granite countertops screws from the inside face the cabinet wall. Define three evenly spaced center points within the length of the debris. And then drill the pilot holes to the corbel screws. Refer to the Corbel manufacturer’s specifications for the fastener placement and dimensionless. Then apply a layer of wood glue for assembly face of corbel will install. And then adjust the corbel with the line layout and the top surface flush with the top of the cabinet.